Dell PowerVault DP600 - Manual (Page 80)

80
3. Check all values listed in the VssAccessControl subkey. If any entry has a value data of 0
and another VSS writer is running under the associated account credentials, change the
value data to 1.
4. Install a protection agent on Server2.
5. On Server2, at a command prompt, change the directory to DPM installation location\bin\
and run the following command:
ConfigureSharepoint.exe
A prompt appears requesting your Windows SharePoint Services farm administrator
credentials. The administrator credentials you provide for the Windows SharePoint
Services farm must be a local administrator on the server.
6. There is a known issue when the server farm is the only member of the protection group
and the protection group is configured to use tape-based protection. If your server farm is
the only member of the protection group using tape-based protection, to change the front-
end Web server that DPM uses to protect the farm, you must temporarily add another
member to the protection group by performing the following steps:
a. In DPM Administrator Console, click Protection on the navigation bar.
b. Select the protection group that the server farm belongs to, and then click Modify
protection group.
c. In the Modify Group Wizard, add a volume on any server to the protection group. You
can remove this volume from the protection after the procedure is completed.
d. If the protection group is configured for short-term disk-based protection and long-
term tape-based protection, select the manual replica creation option. This avoids
creating a replica for the volume that you are temporarily adding to the protection
group.
e. Complete the wizard.
7. Remove Server1 from the protection group, selecting to retain the replicas on disk and
tape.
8. Select the protection group that the server farm belongs to, and then click Modify
protection group.
9. In the Modify Group Wizard, on the Select Group Members page, expand Server2 and
select the server farm, and then complete the wizard.
A consistency check will start.
10. If you performed step 6, you can now remove the volume from the protection group.
Adding Databases to a Windows SharePoint Services Farm
When a database is added to or removed from a Windows SharePoint Services farm, DPM will
mark the replica as inconsistent and alert the administrator.