Installing the display panel, Removing the camera module – Dell Vostro 3360 (Early 2012) User Manual

Page 27

Advertising
background image

Installing the Display Panel

1.

Place the camera cable on the back of the display panel.

2.

Connect the display cable to its connector on the display panel.

3.

Place the display panel to its original position on the display assembly.

4.

Tighten the screws to secure the display panel to the display assembly.

5.

Connect the camera cable to camera module.

6.

Install :
a) display bezel
b) display assembly
c) display hinge cover
d) battery
e) palmrest
f) keyboard
g) access panel

7.

Follow the procedures in

After Working Inside Your Computer

.

Removing the Camera Module

1.

Follow the procedures in

Before Working Inside Your Computer

.

2.

Remove:
a) access panel
b) keyboard
c) palmrest
d) battery
e) display hinge cover
f) display assembly
g) display bezel

3.

Disconnect the camera cable from the camera module and remove the camera module from the display assembly.

27

Advertising