Using the dell soundbar (optional), Soundbar attachment to the monitor – Dell SE198WFP Monitor User Manual
Page 27
¡
Go to support.dell.com, enter your service tag, and download the latest driver for your graphics card.
If you are using a non-Dell computer (portable or desktop):
¡
Go to the support site for your computer and download the latest graphic drivers.
¡
Go to your graphics card website and download the latest graphic drivers.
Using the Dell Soundbar (Optional)
The Dell Soundbar is a stereo two channel system adaptable to mount on Dell Flat Panel Displays. The Soundbar has a rotary volume and on/off control to
adjust the overall system level, a blue LED for power indication, and two audio headset jacks.
Soundbar Attachment to the Monitor
Back to Contents Page
1.
Power/volume control
2.
Power indicator
3.
Headphone connectors
1.
Working from the rear of the monitor, attach the Soundbar aligning the two slots with the two tabs along the bottom rear of the monitor.
2.
Slide the Soundbar to the left until it snaps into place.
3.
Plug in the power cord from the Soundbar in to the connector on the back of the monitor.
4.
Insert the lime-green mini stereo plug from the rear of the Soundbar into the computer's audio output jack.
NOTICE:
Do not use with any device other than Dell Soundbar.
NOTE:
Soundbar Power Connector
- 12V DC output is for optional Dell Soundbar only.