Setting up and using your computer, Attaching and removing the computer stand – Dell Dimension 4700C User Manual
Page 11
Advertising
Setting Up and Using Your Computer
11
Setting Up and Using Your Computer
Attaching and Removing the Computer Stand
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
NOTE:
Place your computer on a soft surface to prevent scratching the top cover.
To attach the stand:
1 Rotate the computer to an upside-down position.
2 Insert the screw into the bottom of the stand.
3 Align the two tabs and the screw on the stand with the tab holes and screw hole in the bottom
of the computer.
Advertising