Dell PowerEdge SC1425 - Manual

www
.dell.com | support.dell.com
Creating an Embedded SATA Controller RAID Array
To easily create a RAID array when using the system’s embedded SATA controller, perform the
following steps:
1 Turn on your system.
2 Press <F2> immediately after you see the following message:
<F2> = Setup
See "System Setup Program" in the User’s Guide for additional information.
3 Enable RAID in the Integrated Devices options in the System Setup program.
4 See your CERC SATA 2s documentation for information on configuring RAID drives.
The CERC SATA 2s RAID driver is available at support.dell.com.
____________________
Information in this document is subject to change without notice.
© 2004 Dell Inc. All rights reserved. Printed in the U.S.A.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names
or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
October 2004