Dell OptiPlex 980 (Early 2010) - Manual (Page 5)

1 Connect the network cable
(optional). 2 Connect the modem
(optional).
3 Connect the monitor using only one of the following cables:
a The blue VGA cable. b The black DisplayPort
cable. c The DisplayPort-to-DVI
adapter cable. d The DisplayPort-to-VGA
adapter cable.
4 Connect the
USB keyboard or
mouse (optional). 5 Connect the
power cable(s). 6 Press the power buttons on the monitor and the computer.
Quick Setup
WARNING:
Before you begin any of the procedures in this
section, read the safety information that shipped with your
computer. For additional best practices information, see
www.dell.com/regulatory_compliance.
NOTE:
Some devices may not be included if you did
not order them.
Y991Mam1.fm Page 5 Tuesday, January 19, 2010 4:39 PM