Replacing hard drive(s) – Dell Alienware Area-51 ALX (Late 2009) User Manual
Page 43
Advertising
043
043
/
CHAPTER 7: DRIVES
2
1
1
hard drive
2 hard-drive connector
Replacing Hard Drive(s)
Follow the instructions in “Before You Begin” on page
1.
NOTE: See the documentation that shipped with your new hard-drive to
verify that it is configured for your computer.
If you are replacing an SSD:
2.
Replace the SSD in the hard-drive bracket.
a.
Replace the four screws that secure the SSD to the hard-drive bracket.
b.
Slide the new hard-drive into the hard-drive bay and align it with the
3.
hard-drive connector.
Press the hard drive down until it locks into place.
4.
Close the right side-panel.
5.
Connect your computer and devices to electrical outlets, and then turn
6.
them on.
Advertising