Dell PowerEdge M600 - Manual (Page 34)

24 M5424 SAN I/O Module Hardware Reference Manual
53-1001082-01
Removing and replacing the SAN I/O Module
3
FIGURE 6 Removing an SFP from a Port
5. Refer to the Hardware Owner’s Manual for the Blade Server Enclosure to remove and replace
the SAN I/O module from the enclosure.
.
ATTENTION
If you are not replacing the SAN I/O Module, use a filler panel to fill the empty slot to maintain proper
air flow. Do not leave the slot empty.
SFP
Bale
3 1
Cable
Release
2
SFP
4