Attaching the soundbar (optional), Removing the stand, Attaching the dell soundbar – Dell 1909Wb Monitor User Manual
Page 64
Dell 1909W Flat Panel Monitor User's Guide
file:///T|/htdocs/monitors/1909W/en/ug/setup.htm[11/8/2012 2:53:45 PM]
After attaching all necessary cables to your monitor and computer, (See
for cable attachment,) use the cable management slot to organize all cables as shown
above.
Attaching the Dell Soundbar
CAUTION:
Do not use with any device other than Dell Soundbar.
NOTE:
Soundbar Power Connector +12V DC output is for optional Dell Soundbar only.
1. Working from the rear of the monitor, attach the Soundbar aligning the two slots with the two tabs along the bottom rear of the monitor.
2. Slide the Soundbar to the left until it snaps into place.
3. Connect the soundbar to the Audio Power DC-out socket (see
view for details).
4. Insert the lime-green mini stereo plug from the rear of the Soundbar into the computer's audio output jack.
Removing the Stand