System setup screens – Dell OptiPlex GX1 User Manual
Page 17
Using the System Setup Program: Dell OptiPlex GX1 Low-Profile Managed PC Systems
file:///C|/infodev/2013/eDoc/OpGX1/SQRG/system.htm[2/21/2013 11:52:58 AM]
1. Turn on your system.
If your system is already on, shut it down and then turn it on again.
2. Press <F2> immediately when the
F2 = Setup prompt appears in the upper-right corner of the Dell
logo screen.
If you wait too long and your operating system begins to load into memory, let the system complete the load
operation; then shut down the system and try again.
NOTE: To ensure an orderly system shutdown, consult the documentation that accompanied your
operating system.
You can also enter the System Setup program by responding to certain error messages. See "
."
System Setup Screens
The two System Setup screens, Page 1 and Page 2, display the current setup and configuration information
and optional settings for your system. (Typical examples are illustrated in Figure 1.)
Figure 1. System Setup Screens