Dell 1209S Projector - Manual (Page 41)

Specifications 41
NOTE: The actual operating life span of a projector lamp will vary according to
operating conditions and usage patterns. Usage of a projector in stressful
conditions which may include dusty environments, under high temperatures
and abrupt powering-off may result in a lamp's shortened operating life span or
possibly lamp failure. The lamp life specified for Dell's projectors refers to the
typical time under non-stressful operating conditions for more than 50% of a
sampling population to reduce to approximately 50% of the lamp's rated
brightness level. It is not the measure of time a lamp will cease light output.
Environmental Operating temperature: 5
o
C - 35
o
C (41
o
F- 95
o
F)
Humidity: 80% maximum
Storage temperature: 0
o
C to 60
o
C
(32
o
F to 140
o
F)
Humidity: 90% maximum
Regulatory FCC, CE, VCCI, UL, cUL, Nemko-GS, ICES-003,
MIC, C-Tick, GOST, CCC, PSB, NOM, IRAM,
SABS, CECP, SASO, PSE, eK
I/O Connectors Power: AC power input socket
Computer input: two D-sub for analog/component,
HDTV input signals
Computer output: one 15-pin D-sub
Video input: one composite video RCA and one S-
video
Audio input: one phone jack (diameter 3.5 mm)
Audio output: one phone jack (diameter 3.5 mm)
USB port: One USB slave for remote support
One mini-DIN RS232 for wired remote control from
PC
DVI-D input: one DVI-D connector for DVI-D
signal (HDCP compliant).
Lamp 165~200-watt user-replaceable 3000-hour lamp (up
to 4000 hours in eco mode)