Installing the front tesla k20 gpgpu card – Dell PowerEdge C8000 User Manual
Page 7
Advertising
7
Installing the Front Tesla K20 GPGPU card
1
Remove the four M3 screws securing the air baffles.
2
Lift the air baffles out of the sled cover.
Figure 1-2. Removing the Air Baffles
3
Remove the four M3 screws securing the mounting brackets.
4
Lift the mounting brackets away from the GPGPU blank. Save the mounting brackets.
5
Lift the GPGPU blank out of the sled cover. Save the GPGPU blank for future use.
Figure 1-3. Removing the Mounting Brackets and GPGPU Blank
1
M3 screws (4)
2
right air baffle
3
left air baffle
4
GPGPU blank
1
M3 screws (4)
2
front mounting bracket
3
back mounting bracket
4
GPGPU blank
1
2
3
4
1
2
3
4
Advertising