Dell Latitude D630C (Late 2008) - Manual (Page 12)

Idle Timeout
Use this setting to define the ME WoL idle timeout. When this timer expires, the ME enters a low-power state. This timeout takes effect only when one of the
ME WoL power policies is selected. Enter the value in minutes.
Intel AMT in DHCP Mode Settings Example
The table below shows a basic field settings example for the Intel AMT Configuration menu page to configure the computer in DHCP mode.
Intel AMT Configurations Example in DHCP Mode
Intel AMT Configuration Parameters Values
Intel AMT Configuration Select and press <Enter>.
Host Name
Example: IntelAMT
This is the same as the operating system machine name.
TCP/IP
Set the parameters as follows:
l Enable Network interface
l Enable DHCP Mode
l Set a domain name (e.g., amt.intel.com)
Provision Model
l Intel AMT 2.6 Mode
l Small Business