Removing the power-connector port – Dell Latitude E6430 ATG (Mid 2012) User Manual
Page 32
Advertising
4.
Install:
a) palmrest
b) display assembly
c) keyboard
d) keyboard trim
e) bluetooth card
f) hard drive
g) base cover
h) battery
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Power-Connector Port
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a) battery
b) base cover
3.
Disconnect the power-connector cable from the system board.
4.
Remove the screw that secures the power-connector bracket to the computer.
32
Advertising