Dell E178WFP Monitor - Manual (Page 6)

Power Management Modes
If you have VESA's DPMS compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use.
This is referred to as Power Save Mode. If input from keyboard, mouse or other input devices is detected by the computer, the monitor automatically resumes
Electrical
The following table lists the electrical specification:
Video input signals Analog RGB: 0.7 Volts +/-5%, 75 ohm input impedance
Synchronization input signals D-sub: Detachable, Analog, 15pin, shipped attached to the monitor
AC input voltage / frequency / current 100 to 240 VAC / 50-60 Hz / 1.5 A Max.
Inrush current 120V: 30A (Max.)
240V: 60A (Max.)
Physical Characteristics
The following table lists the physical characteristics:
Signal cable type D-sub: Detachable, Analog, 15pin, blue connector, attached to the
monitor
Dimensions (with stand):
Height
339.0 mm (13.34 inches)
Width
403.9 mm (15.90 inches)
Depth
136.5 mm (5.37 inches)
Weight:
Monitor (Stand and Head)
3.60 kg (7.93 lb)
Monitor Flat panel only (VESA Mode)
2.70 kg (5.95 lb)
Weight with packaging
4.85 kg (10.68 lb )
Environmental
The following table lists the environmental limitation:
Temperature:
Operating
5° to 35 °C (41° to 95 °F)
Nonoperating
Storage: 0° to 60 °C (32° to 140 °F)
Shipping: -20° to 60 °C (-4° to 140 °F)
Humidity:
Operating
10% to 80% (noncondensing)
Nonoperating
5% to 90% (noncondensing)
Altitude:
Operating
3,657.6 m (12,000 ft) max
Nonoperating 12,192 m ( 40,000 ft ) max
Thermal dissipation 256.08 BTU/hour (maximum)
119.5 BTU/hour (typical)