Quick setup – Dell OptiPlex 380 (Late 2009) User Manual
Page 5
Advertising

1
Connect the network cable
(optional).
2
Connect the modem
(optional).
3
Connect the monitor using only one of the following cables:
a
The blue VGA cable.
b
The white DVI cable.
c
The dual monitor
Y-adapter cable.
d
The VGA cable to
DVI adapter.
4
Connect the
USB keyboard or
mouse (optional).
5
Connect the
power cable(s).
6
Press the power buttons on the monitor and the computer.
Quick Setup
WARNING:
Before you begin any of the procedures
in this section, read the safety information that shipped
with your computer. For additional best practices
information, see www.dell.com/regulatory_compliance.
NOTE:
Some devices may not be included if you did
not order them.
Y705RA01MR.fm Page 5 Tuesday, March 30, 2010 9:06 AM
Advertising