Setting up the monitor, Attaching the base, Connecting your monitor – Dell S1709WFP Monitor User Manual
Page 22
Back to Contents Page
Setting Up the Monitor
Dell™ S1709W Flat Panel Monitor User's Guide
Attaching the Optional Dell Soundbar
Attaching the Base
Connecting Your Monitor
Connecting Your Monitor Using a VGA Cable
NOTE:
The base is detached when the monitor is shipped from the factory.
To attach the base of the stand to the monitor stand:
1. Place the monitor on a stable flat table.
2. Align the groove on the stand base to the raiser on the monitor.
3. Turn the thumb screw clockwise to tighten the monitor stand base and raiser.
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions
.
1.
Turn off your computer and disconnect the power cable.
2. If you are using the monitor, connect the blue VGA cable to the blue connector on the computer and monitor.