Dell Inspiron 8200 - Manual (Page 42)

42 Setting Up and Using Your Computer
w
w
w
.d
e
ll
.co
m
|
s
u
p
p
o
rt
.d
e
ll.c
o
m
HINT: You must use
CD-R discs to burn music
CDs that you want to
play in regular stereos.
CD-RW discs do not play
in most home or car
stereos.
6 Insert a blank CD into the CD-RW drive and close the tray.
The recording starts automatically.
7 After the recording completes, click OK.
Turning Off the Computer
NOTICE: To prevent data loss, you must turn off your computer through the
Start menu rather than by pressing the power button.
HINT: If you are having
difficulties turning off
your computer, see
"General Program
Problems" on page 89.
1 Save and close any open files and exit any open programs.
2 Click the Start button and then click Turn off Computer.
3 Click Turn off.
The computer automatically turns off after the shutdown process finishes.
About the Module Bay
You can install devices such as a floppy drive, CD drive, CD-RW drive,
DVD drive, DVD/CD-RW drive, Zip drive, second hard drive, or second
battery in the module bay.
NOTICE: To prevent damage to the docking connector, do not remove or
replace devices while the computer is connected to a docking device.
Swapping Devices While the Computer
Is Turned Off
1 Save and close any open files, exit any open programs, and shut down
the computer (see page 42).
2 If the computer is connected (docked) to a docking device, undock it.
3 Close the display and turn the computer over.
4 Slide and hold the latch release, and pull the device out of the bay.
NOTICE: To prevent damage to devices, place them in a travel case when they
are not installed in the computer. Store devices in a dry, safe place, and avoid
pressing down on them or placing heavy objects on top of them.
1H018bk3.book Page 42 Monday, October 14, 2002 2:26 PM