Dell PowerVault MD3260i User Manual
Dell Computer hardware
Advertising
Table of contents
Document Outline
- Dell PowerVault MD3260i Series Storage Arrays Deployment Guide
- Introduction
- Hardware Installation
- Installing MD Storage Manager
- Post Installation Tasks
- Guidelines For Configuring Your Network For iSCSI
- Uninstalling MD Storage Manager
- Appendix — Manual Configuration Of iSCSI
- Step 1: Discover The Storage Array (Out-of-band Management Only)
- Step 2: Configure The iSCSI Ports On The Storage Array
- Step 3: Perform Target Discovery From The iSCSI Initiator
- Step 4: Configure Host Access
- Understanding CHAP Authentication
- Step 5: Configure CHAP Authentication On The Storage Array (Optional)
- Step 6: Configure CHAP Authentication On The Host Server (Optional)
- Step 7: Connect To The Target Storage Array From The Host Server
- Step 8: (Optional) Set Up In-Band Management
- Appendix — Using Internet Storage Naming Service
- Appendix — Load Balancing
- Appendix — Stopping And Starting iSCSI Services In Linux
- IPv4 Settings — Worksheet
- IPv6 Settings — Worksheet