System overview, Front-bezel indicators, Front-panel indicators and features – Dell PowerEdge 6650 User Manual
Page 17
Back to Contents Page
System Overview
Dell™ PowerEdge™ 6650 Systems User's Guide
Front-Panel Indicators and Features
Back-Panel Indicators and Features
Obtaining Technical Assistance
Your system is a high-performance enterprise server offering new levels of performance and scalability with up to four Intel
®
Xeon™ microprocessors and 16
GB of system memory, as well as hot-pluggable redundant hard drives, expansion slots, power supplies, and system fans.
This section describes the major hardware and software features of your system and provides information about the indicators on the system's front and back
panels. It also provides information about other documents you may need when setting up your system and how to obtain technical assistance.
Front-Bezel Indicators
The system's bezel has an indictor that can represent system status when the bezel is installed (see
). The indicator signifies when the system is
operating properly or when the system needs attention. The back-panel system-status indicator functions the same as the bezel indicator. A caution code
signifies a problem with power supply, system or power-supply fans, system temperature, hard drives, or expansion cards.
lists the system's status indicator codes and the system's back-panel status indicator codes.
Figure 1-1. System Status Indicators
Front-Panel Indicators and Features
Additional indicators are located behind the bezel for system power and hard drives. The CD and diskette drives have green activity indicators. The front-panel
LCD display provides status information using an alphanumeric character display (see "
"). See
for the front-panel indicators
and features.
Figure 1-2. Front-Panel Features and Indicators
Table 1-1. System Status Indicator Codes
Bezel Indicators Back-Panel
Indicator
Indicator Code
Status
Caution
Off
Off
Off
No power is available to the system, or the system is not powered on.
1
On
Off
Blue
The system is operating normally.
Off
Blinking Amber blinking
The system has detected an error and requires attention.
Blinking Off
Blue blinking
The system is identifying itself.
NOTE:
Systems management software causes the status indicator to blink to identify a particular system. For more
information, see the systems management software documentation.
1
See your Installation and Troubleshooting Guide for more information.