Dell Precision M4500 (Early 2010) - Manual (Page 41)

Back to Contents Page
SD Card Board
Dell Precision™ Mobile Workstation M4500 Service Manual
Removing the SD Card Board
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the battery
3. Remove the access panel .
4. Remove the optical drive .
5. Remove the keyboard .
6. Remove the hinge covers .
7. Remove the SD card .
8. Remove the display assembly .
9. Remove the palm rest assembly .
10. Release the cable tab and disconnect the SD card data cable from the system board.
11. Remove the screw that secures the SD card board to the computer.
12. Lift the SD card board up and away from the computer.
Replacing the SD Card Board
To replace the SD card board, perform the above steps in reverse order.
Back to Contents Page
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE: You may need to install Adobe™ Flash Player™ from Adobe.com in order to view the illustrations below.