Installing the memory module, Removing the hard-drive assembly – Dell Vostro 2421 (Early 2013) User Manual
Page 12
Advertising
Installing the Memory Module
1.
Insert the memory module into the memory socket and press until it clicks into place.
2.
Install:
a) access panel
b) battery
3.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Hard-Drive Assembly
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a) battery
b) access panel
3.
Remove the screws that secure the hard-drive assembly to the computer.
4.
Slide the hard drive in the direction shown and lift the tab to remove it from the computer.
12
Advertising