Replacing the top i/o panel – Dell Studio XPS 8000 (Late 2009) User Manual
Page 55
Advertising
Replacing the Top I/O Panel
1.
Follow the procedures in
Before You Begin
.
2.
Align the screw holes in the top I/O panel with the screw holes in the top panel.
3.
Replace the two screws that secure the top I/O panel to the top panel.
4.
Connect the top I/O panel cables to the system board connectors F_USB3 and F_AUDIO1 (see
System Board Components
).
5.
Replace the top cover (see
Replacing the Top Cover
).
6.
Replace the optical drive (see
Replacing the Optical Drive
).
7.
Replace the front bezel (see
Replacing the Front Bezel
).
8.
Replace the computer cover (see
Replacing the Computer Cover
).
9.
Connect your computer and devices to electrical outlets, and turn them on.
Back to Contents Page
Advertising