Dell PowerEdge 600SC - Manual (Page 10)

Back-Panel Features
Figure 1 -3 shows the back-panel features of the system.
Figure 1-3. Back-Panel Features
When connecting external devices to your system, follow these guidelines:
l Check the documentation that accompanied the device for specific installation and configuration instructions. For example, most devices must be
connected to a particular connector to operate properly. Also, external devices usually require you to install device drivers before they will work. Device
drivers are normally included with your operating system software or with the device itself.
l Always attach external devices while your system is turned off. Next, turn on any external devices before turning on the system unless the
documentation for the device specifies otherwise. (If the system does not seem to recognize the device, try turning on the system before turning on the
device.)
For information about enabling, disabling, and configuring I/O ports and connectors, see " Using the System Setup Program ."