Dell Broadcom NetXtreme Family of Adapters User Manual
Page 8
6
Installing Broadcom NetXtreme II Drivers and TOE
•
If a stop error message is issued when you perform a file operation on
a system running Windows Server 2003 that has IPv6 installed,
see http://support.microsoft.com/kb/942088.
•
If a system running Windows Server 2003 with the TCP Chimney feature
enabled restarts unexpectedly followed by a stop error message,
see http://support.microsoft.com/kb/949234.
•
If your system experiences reduced memory performance when you use
the sockdie process with the -maxtput switch, see
http://support.microsoft.com/kb/918369.
•
If your system is running Windows Server 2003 and it stops responding
when you try to enter the system into S4 system power state for
hibernation, see http://support.microsoft.com/kb/927622.
•
If a stop error message is issued after you install Windows Server 2003 SNP,
see http://support.microsoft.com/kb/918564.
•
If you experience a problem with a network application that uses NetBT
after you have installed Windows Server 2003 SNP, see
http://support.microsoft.com/kb/924325.
•
If failover does not occur on network adapters teamed for TCP Offloading
on a Windows Server 2003 system, see
http://support.microsoft.com/kb/921136.
•
If an error message is issued after you install Windows Server 2003 SNP
and then change the network settings, see
http://support.microsoft.com/kb/919948.
•
If you experience network-related problems after you install Windows
Server 2003 SP2 or Windows Server 2003 SNP, see
http://support.microsoft.com/kb/936594.
•
If users experience delayed logins when Password Management features are
enabled in ISA Server 2006, see http://support.microsoft.com/kb/555958.