Removing the stand, Wall mounting (optional) – Dell E2011H Monitor User Manual
Page 28
Removing the Stand
To remove the stand:
To remove the stand:
1.
Press and hold the Stand release button.
2.
Lift the stand up and away from the monitor.
Wall Mounting (Optional)
(Screw dimension: M4 x 10 mm).
Refer to the instructions that come with the VESA-compatible base mounting kit.
1.
Place the monitor panel on a soft cloth or cushion on stable flat table.
2.
Remove the stand.
3.
Use a screwdriver to remove the four screws securing the plastic cover.
4.
Attach the mounting bracket from the wall mounting kit to the LCD.
5.
Mount the LCD on the wall by following the instructions that came with the base mounting kit.
Back to Contents Page
NOTE:
To prevent scratches on the LCD screen while removing the stand,
ensure that the monitor is placed on a clean surface.
NOTE:
This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for set up
instructions.
NOTE:
For use only with UL Listed Wall Mount Bracket with minimum weight/load bearing capacity of 2.90 kg.