Installing the expresscard cage, Removing the power-connector port – Dell Latitude E6530 (Mid 2012) User Manual

Page 32

Advertising
background image

4.

Remove the ExpressCard cage from the computer.

Installing the ExpressCard Cage

1.

Place the ExpressCard cage into its compartment.

2.

Tighten the screws to secure the ExpressCard cage to the computer.

3.

Install:
a) palmrest
b) display assembly
c) keyboard
d) keyboard trim
e) bluetooth card
f) hard drive
g) base cover
h) battery

4.

Follow the procedures in

After Working Inside Your Computer

.

Removing the Power-Connector Port

1.

Follow the procedures in

Before Working Inside Your Computer

.

2.

Remove:
a) battery
b) base cover

3.

Disconnect the power-connector cable from the system board.

32

Advertising