Dell Latitude E4200 (Late 2008) - Manual (Page 8)

8 Setting Up Dell Latitude ON
Starting Latitude ON
NOTE: When your computer is in the Latitude ON mode, you are no longer in the
Microsoft ® Windows ® operating system environment.
To start your computer in the Latitude ON mode, press the
Latitude ON button .
NOTE: If the computer is turned off, it will boot to the Latitude ON mode. If the
computer is in the Microsoft Windows mode, the computer will hibernate and
switch to the Latitude ON mode.
Configuring Latitude ON
1 Start your computer in the Latitude ON mode (see "Starting Latitude ON"
on page 8).
2 On the Latitude ON welcome screen, click Next.
3 Select the language and click Next. The Keyboard Selection window
appears.
4 Select the keyboard type from the drop-down list and click Next.
A window appears prompting you to create a password.
5 Create a password and re-enter the password to confirm.
NOTE: The password must adhere to the criteria outlined on the screen.
If your password does not adhere to the required criteria or you enter
mismatched passwords, Latitude ON prompts you to enter the correct
password.
A window appears indicating that the setup process is complete and
prompts you to use the Network Manager. For more information,
see "Configuring the Network Settings" on page 11.
NOTE: Latitude ON allows you to configure the wireless connection during the
initial setup. You can configure the Mobile Broadband connection only after
completing the initial setup.
NOTE: Latitude ON prompts you to enter the password during every new session.
If you enter a wrong password three consecutive times, the computer shuts down.
Restart your computer in the Latitude ON mode and try again.
A5_bk0.book Page 8 Tuesday, August 25, 2009 5:03 PM