Dell Precision M90 - Manual (Page 18)

Installing a Media Memory Card
You can install a media memory card in the computer while the computer is running. The computer automatically detects the card.
Media memory cards are generally marked with a symbol (such as a triangle or an arrow) or a label to indicate which end to insert into the slot. The cards are
keyed to prevent incorrect insertion. If card orientation is not clear, see the documentation that came with the card.
To install a media memory card:
1. Hold the card with the top side of the card facing up.
2. Slide the card into the slot until the card is completely seated in its connector.
If you encounter too much resistance, do not force the card. Check the card orientation and try again.
The computer recognizes the media memory card and automatically loads the appropriate device driver. If the configuration program tells you to load the
manufacturer's drivers, use the CD that came with the media memory card, if applicable.
Removing a Media Memory Card
Press the card in to release and remove the card.
Back to Contents Page
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
1 5-in-1 media memory card slot 2 media memory card
NOTICE: Use the media memory card configuration utility (click the icon in the taskbar) to select a card and stop it from functioning before you
remove it from the computer. If you do not stop the card in the configuration utility, you could lose data.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.