Dell PowerEdge 500SC User Manual
Page 32
6.
Replace the system cover.
7.
Reconnect the system to the electrical outlet, and turn on the system power.
8.
Enter the
System Setup program
to confirm that the battery is operating properly.
9.
Enter the correct time and date through the System Setup program's Time and Date settings.
Also reenter any system configuration information that is no longer displayed on the System Setup screens, and then exit the System Setup program.
10.
To test the newly installed battery, power down and disconnect the system from the electrical source for at least an hour.
11.
After an hour, connect the system to an electrical source and turn on the power.
12.
Enter the
System Setup program
and if the time and date are still incorrect, replace the system board.
Back to Contents Page