Smart card reader – Dell Precision M90 User Manual
Page 44
Back to Contents Page
Smart Card Reader
Dell Precision™ M90 Mobile Workstation Service Manual
1.
Follow the instructions in
Before Working Inside Your Computer
.
2.
Remove the optical drive (see
Optical Drive
).
3.
Remove the hinge cover (see
Removing the Hinge Cover
).
4.
Remove the display assembly (see
Removing the Display Assembly
).
5.
Remove the keyboard (see
Keyboard
).
6.
Remove the palm rest (see
Palm Rest
).
7.
Remove the smart-card reader screw.
8.
Remove the smart-card reader connector from the system board.
9.
To remove the smart card reader, pry up the reader by the metal screw plate and pull up and out from underneath the side tabs.
Back to Contents Page
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To help prevent damage to the system board, remove the main battery (see
Before Working Inside Your Computer
) before working inside the
computer.
1 smart card
reader
2 smart-card reader
screw
3 smart-card reader connector on system
board