Dell OptiPlex XE (Early 2010) - Manual (Page 4)

1 Connect the network cable
(optional). 2 Connect the USB keyboard
or mouse (optional).
3 Connect the monitor using only one of the following cables:
a The blue VGA cable. b The DisplayPort cable. c The DVI cable to
DisplayPort adapter. d The VGA cable to
DisplayPort adapter.
4 Connect the
power cable(s). 5 Press the power buttons on the monitor and the computer.
Quick Setup
WARNING:
Before you begin any of the procedures in this
section, read the safety information that shipped with your
computer. For additional best practices information,
see www.dell.com/regulatory_compliance.
NOTE:
Some devices may not be included if you did
not order them.
P609Nam0.fm Page 4 Thursday, October 15, 2009 5:17 PM