Dell 1610HD Projector - Manual (Page 42)

M ENU S ETTINGS — Select and press on the control panel or press Enter button
on the remote control to activate menu settings. The menu settings consists of the
following options:
M ENU P OSITION — Allows you to change the position of the OSD menu on
the screen.
M
ENU
T
RANSPARENCY
— Select to change the transparency level of the OSD
background.
M ENU T IMEOUT — Allows you to adjust the time for an OSD timeout. By
default, the OSD disappears after 20 seconds of non-activity.
M ENU L OCK — Select On to enable Menu Lock and hide the OSD menu.
Select OFF to disable the Menu Lock. If you want to disable the Menu
Lock function and have the OSD disappear, press the Menu button on the
control panel or remote control for 15 seconds, then disable the function.
S CREEN S ETTINGS — Select and press on the control panel or press Enter button
on the remote control to activate screen settings. The screen settings menu
consists of the following options:
C APTURE S CREEN — Select and press on the control panel or press Enter
button on the remote control to capture the screen display, the following
message appears on the screen.
NOTE: To capture a full image, ensure the input signal that is
connected to the projector is 1024 x 768 resolution.
Using Your Projector 42