Display (in pc mode) – Dell 2400MP Projector User Manual

Page 25

Advertising
background image

Using Your Projector

25

S

ATURATION

Adjust a video source from black and white to fully saturated color.

Press to decrease the amount of color in the image and to increase the

amount of color in the image.
S

HARPNESS

Press

to decrease the sharpness and to increase the

sharpness.

T

INT

Press

to increase the amount of green in the image and to

increase the amount of red in the image.

DISPLAY (in PC Mode)

V

IDEO

M

ODE

Select a mode

to optimize the display on

how the projector is being

used: PC, MOVIE, sRGB

(provides more accurate

color representation),

GAME , and CUSTOM

(set your preferred

settings). If you adjust the

settings for White

Intensity or Degamma, the

projector automatically

switches to CUSTOM.
S

IGNAL

T

YPE

Manually

select signal type RGB,

YCbCr, YPbPr.

Z

OOM

Press to digitally magnify an image to 10 times on the projection screen

and press to reduce the zoomed image.
W

HITE

I

NTENSITY

Setting 0 to maximize the color reproduction and 10 to

maximize the brightness.
D

EGAMMA

Adjust among the 4 preset values to change the color performance of

the display.
H

ORIZONTAL

P

OSITION

Press

to adjust the horizontal position of the image to

the left and to adjust the horizontal position of the image to the right.

V

ERTICAL

P

OSITION

Press

to adjust the vertical position of the image down

and to adjust the vertical position of the image up.

F

REQUENCY

Change the display data clock frequency to match the frequency of

your computer graphics card. If you see a vertical flickering bar, use Frequency
control to minimize the bars. This is a coarse adjustment.

Advertising