Dell Precision R5500 (Early 2011) - Manual (Page 52)

Related Links
Installing the Remote Access Host Card
Installing the Remote Access Host Card
1. Place and insert the Remote Access Host Card in to the slot provided.
2. Replace the release latch to secure the Remote Access Host Card.
3. Install the SAS controller card .
4. Install the video card .
5. Install the CMOS battery .
6. Install the center riser board .
7. Install the power distribution unit .
8. Install the card cages .
9. Install the fan bracket .
10. Install the system fans .
11. Install the control panel .
12. Install the power supply .
13. Install the SAS backplane .
14. Install the hard drive assembly .
15. Install the hard drive carrier .
16. Install the optical drive .
17. Install the cooling shroud .
18. Install the cover .
19. Install the front bezel .
20. Follow the procedures in After Working Inside Your Computer .
Related Links
Removing the Remote Access Host Card
52