Dell Inspiron 3700 - Manual (Page 9)

Dell Inspiron 3700 System Advanced Port Replicator User’s Guide 5
  

To connect your computer to the APR, perform the following steps:
1. Verify that the operating system has completed the setup process.
For instructions, refer to the Setup Guide that accompanied your computer.
2. Save and close all open files, exit all open application programs, and shut down
the computer.
3. If you have not already done so, connect the AC adapter to the connector on the
APR (see Figure 1), and plug the AC power cable into an electrical outlet.
4. Place the computer on the APR platform, with the back of the computer facing
the APR’s docking connector, as shown in Figure 4.
5. Push the computer forward until the docking connectors are fully engaged.

% &
'(
   

Perform the following steps to disconnect the computer from the APR:
1. Save and close all open files and exit all open application programs.


    
  "
 
     

  &'"