Dell PowerEdge C6220 II User Manual
Dell Computer hardware
Installing the LSI 9285 PCIe Card on
Dell PowerEdge C6220 Systems
Follow the procedure in this document to install the LSI 9285 PCIe card on your
Dell PowerEdge C6220 1U node.
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your product
documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty.
Read and follow the safety instructions that came with the product.
The following items are available in the PCIe card kit:
•
LSI 9285 PCIe card
•
rubber jumper
To install the LSI 9285 PCIe card:
1 Turn off the system, including any attached peripherals, and disconnect the
system from the electrical outlet.
2 Open the system.
3 Locate the jumper PCN3 on the system board.
4 Ensure that you place the rubber jumper on pin 2 of the system-board jumper.
For more information see Figure 1.
Document Outline
- Installing the LSI 9285 PCIe Card on Dell PowerEdge C6220 Systems
- 在 Dell PowerEdge C6220 系统上安 装 LSI 9285 PCIe 卡
- Installation de la carte PCIe LSI 9285 sur les systèmes Dell PowerEdge C6220
- Installieren der LSI 9285 PCIe-Karte auf Dell PowerEdge C6220-Systemen
- Dell PowerEdge C 6220 システムへ の LSI 9285 PCIe カードの取り付け
- Dell PowerEdge C6220 시스템에 LSI 9285 PCIe 카드 설치
- Instalación de la tarjeta PCIe LSI 9285 en los sistemas Dell PowerEdge C6220
- LSI 9285 PCIe Kartını Dell PowerEdge C6220 Sistemlerine Takma