Dell XPS 12 (9Q33, Mid 2013) - Manual (Page 44)

Replacing the Camera Module
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9.
For more safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1 Connect the camera cable to the camera module.
2 Use the alignment posts on the display panel to place the camera module on the
display panel.
3 Align the screw holes on the camera module with the screw holes on the
display panel.
4 Replace the screws that secure the camera module to the display panel.
Postrequisites
1 Replace the display back-cover. See "Replacing the Display Back-Cover" on
page 42.
2 Replace the battery. See "Replacing the Battery" on page 14.
3 Replace the base cover. See "Replacing the Base Cover" on page 12.
44 | Replacing the Camera Module