Installing the processor, Removing the coin-cell battery – Dell Vostro 3560 (Early 2012) User Manual
Page 35
j) speaker
k) system board
l) heat sink
3.
Remove the screw. Remove the processor cover and lift the processor from the socket. Place it in an antistatic
package.
Installing the Processor
1.
Insert the processor into the processor socket. Ensure the processor is properly seated. Replace the processor
cover.
2.
Tighten the screw to secure the processor to the system board.
3.
Install the:
a) heat sink
b) system board
c) ExpressCard reader
d) WLAN card
e) palmrest
f) keyboard
g) hard drive
h) optical drive
i) memory
j) base cover
k) battery
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Coin-Cell Battery
1.
Follow the procedures in
Before Working Inside Your Computer
2.
Remove the:
a) battery
b) base cover
c) memory
d) optical drive
e) hard drive
f) keyboard
g) palmrest
h) ExpressCard reader
i) WLAN card
j) speaker
k) system board
3.
Flip the system board and locate the coin-cell battery.
35