Dell UPS 4200R - Manual (Page 16)

Dell UPS Management Software: Common Software Installation Scenarios
16
Figure 16: MUMC auto discovery  node list
To perform a mass configuration of ULNM agents:
 Click “Node Settings” and Ctrl/Shift + click to select multiple ULNM nodes.
Figure 17: MUMC node settings
 Edit Shutdown Settings in right-hand Node Configuration menu panel:
o
Click the pencil icon .
o
Check the box for items you want to configure & enter required variables.
o
“Apply” settings.
o
Click “Synchronize” at the top of the Node Configuration panel to send new settings to
the ULNM agents. (A mark indicated values that have not been synchronized with
the remote ULNM agent.)
o
Click the “Synchronize” button to send the settings.
For a detailed explanation of shutdown timer settings, refer to Appendix 2.