Dell PowerVault MD3420 - Manual (Page 24)

Graphical Installation (Recommended)
The PowerVault MD Storage Manager software configures, manages, and monitors the storage array. To
install the MD storage software:
1. Insert the PowerVault MD series resource media.
Depending on your operating system, the installer may launch automatically. If the installer does not
launch automatically, navigate to the root directory of the installation media (or downloaded installer
image) and run the md_launcher.exe file. For Linux-based systems, navigate to the root of the
resource media and run the autorun file.
NOTE: By default, Red Hat Enterprise Linux mounts the resource media with the –noexec
mount option, which does not allow you to run executable files. To change this setting, see the
Readme file in the root directory of the installation media.
2. Select Install MD Storage Software.
3. Read and accept the license agreement.
4. Select one of the following installation options from the Install Set dropdown menu:
– Full (recommended) — Installs the MD Storage Manager (client) software, host-based storage
agent, multipath driver, and hardware providers.
– Host Only — Installs the host-based storage agent and multipath drivers.
– Management — Installs the management software and hardware providers.
– Custom — Allows you to select specific components.
5. Choose whether to start the event monitor service automatically when the host server reboots or
manually.
NOTE: This option is applicable only to Windows client software installation.
6. Confirm the installation location and choose Install.
7. If prompted, reboot the host server after the installation completes.
8. When the reboot is complete, the Modular Disk Configuration Utility (MDCU) may launch
automatically. If the MDCU does not launch automatically, launch it manually.
– In a Windows-based operating system, click Start → Dell → Modular Disk Configuration Utility.
– In a Linux-based operating system, double-click the Modular Disk Configuration Utility icon on
the desktop.
9. Start MD Storage Manager and discover the arrays.
10. If applicable, activate any premium features purchased with your storage array. If you purchased
premium features, see the printed activation card shipped with your storage array.
NOTE: The MD Storage Manager installer automatically installs the required drivers, firmware,
and operating system patches/hotfixes to operate your storage array. These drivers and
firmware are also available at dell.com/support. In addition, see the Dell PowerVault MD34xx/
38xx Series Support Matrix at dell.com/support/manuals for any additional settings and/or
software required for your specific storage array.
Console Installation
NOTE: Console installation only applies to Linux systems that are not running a graphical
environment.
24