Dell OptiPlex SX270N - Manual (Page 14)

As an option, you may mount the computer to a vertical or horizontal surface by using a wall-mount bracket. If you have the integrated flat-panel option, the
stand is integrated as part of the total assembly.
Chassis Stand
You may attach the chassis stand to orient your computer vertically. You can also attach the stand to the mounting plate (see " Mounting Plate ") to hang the
computer under a tabletop or desktop or to securely attach the computer to a horizontal surface.
1. Raise the captive screw and slide the chassis stand slat into one of three mounting slots on the back of the computer.
2. When the stand is in place, tighten the screw.
NOTICE: Do not place your monitor on the computer. Use a monitor stand.
NOTICE: In a high-vibration environment or when installing the computer overhead, use the optional wall-mount bracket instead of the chassis stand.
To order this bracket, contact Dell .
NOTICE: To ensure proper ventilation, do not place your computer vertically on a desktop without using the chassis stand (see " Chassis Stand ").
NOTICE: To ensure proper ventilation, do not block the cooling vents.
1 captive screw
2 chassis stand