Ip default-gateway – Dell PowerEdge M605 User Manual
Page 323
IP Addressing Commands
305
Syntax
ip address vlan vlanid
no ip address vlan
•
vlanid—vlan identification. (Range 1-4093)
Default Configuration
The default configuration value is 1.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets VLAN 5 as management VLAN.
console(config)#ip address vlan 5
ip default-gateway
Use the ip default-gateway command in Global Configuration mode to define a default gateway
(router).
Syntax
ip default-gateway ip-address
•
ip-address — Valid IP address that specifies the IP address of the default gateway.
Default Configuration
No default gateway is defined.
Command Mode
Global Configuration mode
User Guidelines
IP address protocol should be set to "none" before setting the gateway.
Example
The following example defines ip default-gateway as 10.240.4.1.
console(config)#ip default-gateway 10.240.4.1