Removing the wireless mini-card, Prerequisites – Dell Alienware 18 (Mid 2013) User Manual

Page 105

Advertising
background image

Removing the Wireless Mini-Card |

105

Removing the Wireless Mini-Card

WARNING:

Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in
"Before You Begin" on page 11. For
additional safety best practices
information, see the Regulatory Compliance Homepage at

dell.com/regulatory_compliance.

NOTE:

Dell does not guarantee compatibility or provide support for wireless

Mini-Cards from sources other than Dell.

If you ordered a wireless Mini-Card with your computer, the card is already installed.

Your computer has one half Mini-Card slot which supports a Wireless Local Area Network
(WLAN) + Bluetooth combo card.

Prerequisites

1

Remove any installed card or blank from the Media-Card Reader.

2

Remove the base cover. See "Removing the Base Cover" on page 14.

3

Remove the fans cover. See "Removing the Fans Cover" on page 29.

4

Remove the battery pack. See "Removing the Battery Pack" on page 16.

5

Remove the hard drive(s). See “Removing the Hard Drive(s)” on page 25.

6

Remove the optical drive. See "Removing the Optical Drive" on page 22.

7

Follow the instructions from step 1 to step 6 in Removing the Palm Rest.

Book.book Page 105 Friday, June 28, 2013 11:10 AM

Advertising