Dell Alienware 15 (Early 2015) - Manual (Page 5)

Before Working Inside Your
Alienware Graphics Amplifier
CAUTION: To avoid damaging the components and cards,
handle them by their edges and avoid touching pins and
contacts.
NOTE: The images in this document may differ from your device
depending on the configuration you ordered.
Before You Begin
1 Disconnect your device and all attached devices from their electrical
outlets.
2 Disconnect all cables such as telephone cables, network cables and so on,
from your device.
3 Disconnect all attached peripherals, such as keyboard, mouse, monitor,
and so on, from your device.
Safety Instructions
Use the following safety guidelines to protect your device from potential
damage and ensure your personal safety.
WARNING: Before working inside your device, read the
safety information that ships with your device. For more
safety best practices, see the Regulatory Compliance home
page at dell.com/regulatory_compliance.
WARNING: Disconnect all power sources before opening the
device cover or panels. After you finish working inside the
device, replace all covers, panels, and screws before
connecting to the power source.
CAUTION: To avoid damaging the device, make sure that the
work surface is flat and clean.
5