Controls and indicators, Power, Physical – Dell OptiPlex GX1p User Manual

Page 57: Environmental

Advertising
background image

Controls and Indicators

Reset control

push button

Power control

push button

Power indicators

green LEDs (one on front panel, one on riser board); blinking green in sleep state

Hard-disk drive access indicator

green LED

Link integrity indicator
(on optional integrated NIC connector)


green LED

Activity indicator (on optional integrated NIC
connector)


yellow LED

Power

DC power supply:

Wattage

200 W

Heat dissipation

913 BTUs (fully loaded system without monitor)

Voltage

90 to 135 V at 60 Hz; 180 to 265 V at 50 Hz

Backup battery

3-V CR2032 coin cell

Physical

Height

16.5 cm (6.5 inches)

Width

41.9 cm (16.5 inches)

Depth

44.5 cm (17.5 inches)

Weight

12.7 kg (28.0 lb) or more, depending on options installed

Environmental

Temperature:

Operating

10 to 35C (50 to 95F)

Storage

-40 to 65C (-40 to 149F)

Relative humidity

8% to 80% (noncondensing)

Maximum vibration:

Operating

0.25 G at 3 to 200 Hz at 1 octave/min

Storage

0.5 G at 3 to 200 Hz at 1 octave/min

Maximum shock:

Operating

left side (vertical orientation) and bottom half-sine pulse with a change in velocity of 20
inches/sec (50.8 cm/sec)

Storage

27-G faired square wave with a velocity change of 200 inches/sec (508 cm/sec)

Altitude:

Operating

-16 to 3048 m (-50 to 10,000 ft)

Storage

-16 to 10,600 m (-50 to 35,000 ft)

NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary in the online System User's Guide.

Advertising