Dell Inspiron 17R (5720, Mid 2012) - Manual (Page 86)

86 | Processor
Procedure
1 To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the ZIF-
socket cam screw counterclockwise until it comes to the cam stop.
CAUTION: To ensure maximum cooling for the processor, do not touch the heat
transfer areas on the processor thermal cooling assembly. The oils in your skin
can reduce the heat transfer capability of the
thermal pads.
CAUTION: When removing the processor module, pull the module
straight up. Be careful not to bend the pins on the processor module.
2 Lift the processor module from the ZIF socket.
1 processor 2 ZIF socket
3 processor pin-1 corner 4 ZIF-socket pin-1 corner
5 ZIF-socket cam screw
2
5
1
4 3
book.book Page 86 Monday, October 8, 2012 4:17 PM