Mini-cards, Removing the wlan card – Dell Vostro A860 (Late 2008) User Manual
Page 28
Back to Contents Page
Mini-Cards
Dell™ Vostro™ A840/A860 Service Manual
Your computer supports one Mini-Card for WLAN.
Removing the WLAN Card
1.
Follow the procedures in
"Before You Begin" on page 9
.
2.
Remove the module cover (see
Removing the Module Cover
).
3.
Disconnect the antenna cables from the WLAN card.
4.
Remove the two securing screws from the card.
5.
Lift the WLAN card out of its system board connector.
CAUTION:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTICE:
To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the
computer.
NOTE:
If you ordered a WLAN card with your computer, the card is already installed.
NOTE:
Dell does not guarantee compatibility or provide support for Mini-Cards from sources other than Dell.
1 WLAN card
2 securing screw (2)
3 antenna cable connector (2)