Dell PowerVault 701N (Deskside NAS Appliance) - Manual (Page 14)

Restoring a Backup
14
5 After you have created an initial backup, click Start monitoring to have
DataKeeper run in the background and automatically back up files that are
changed.
The custom backup options you have selected will be in effect until you change
them.
Mobile Support
If you are using a portable computer remotely and the PowerVault 701N/705N is
unavailable when a backup is made, the backup file is automatically saved to the
substitute local backup destination on your hard disk. You can change the substitute
location by clicking Browse to the right of the Substitute text box on the Backup tab.
If the substitute backup destination on the hard disk is active when you start up and
DataKeeper detects the PowerVault 701N/705N, you will be prompted to change your
substitute backup location to the PowerVault 701N/705N. When you change to the
PowerVault 701N/705N, any backup files on your local hard disk are copied to the
specified PowerVault 701N/705N and deleted from the hard disk. If you choose not to
change your backup location to the specified PowerVault 701N/705N, you will be
prompted with the same message the next time monitoring is restarted and the
PowerVault 701N/705N is detected.
Restoring a Backup
You can restore backed up individual or multiple files or folders in one operation.