Installing the heat sink and processor – Dell OptiPlex 390 (Mid 2011) User Manual
Page 33
Advertising
Installing The Heat Sink and Processor
1. Insert the processor into the processor socket. Ensure that the processor is
properly seated.
2. Lower the processor cover.
3. Press the release lever down and then move it inward to secure it with the
retention hook.
4. Place the heat sink assembly into the chassis.
5. Tighten the captive screws to secure the heat sink assembly to the system
board.
6. Connect the heat sink assembly cable to the system board.
7. Install the
.
After Working Inside Your Computer
33
Advertising